Miramodus Molecular Models


Imperfect crystal structure models
dislocations, defects and epitaxial growth

 

Crystal structure models are perfect for illustrating crystal structures but, in reality, few crystals are themselves perfect. Real crystals are subject to the laws of thermodynamics, and the influence of entropy prevents the existence of perfect crystalline order.

 

 

Dislocations


There are relatively few ways in which dislocations can form in crystals, and we supply models of all of them. The most commonly encountered are the screw dislocation and the edge dislocation. Unfortunately, images of our screw dislocation model fail to do it justice:


model of a screw dislocation

Screw dislocation

 

Edge dislocations are more readily understood when depicted within a primitive cubic lattice but, if you require it, we can create the dislocation within other lattices, such as the body centred cubic lattice shown below.


model of an edge dislocation model of a BCC edge dislocation

Edge dislocations


Other common dislocations include the 60° dislocation in the diamond structure, where two adjacent layers in the 110 direction are rotated by 60° (or, equivalently, 180°) with respect to each other:

 

crystal structure model of a 60 degree dislocation in silicon

Crystal structure model of Silicon with the unit cell highlighted a 60° dislocation between the red and blue regions. A highlighted unit cell is included in the model.

 

This dislocation is just one example of a stacking fault - more complex stacking faults inevitably lead to much larger models, and while it is only rarely that we are asked for such models, we can make up any stacking fault you want. Twin boundaries and antiphase boundaries are relatively straightforward; grain boundaries - large scale dislocations between grains that sit at an angle to one another are probably more complex to make up than almost any other model that we make.

 

Point defects

 

Point defects are relatively easy to introduce into models, so the depiction of vacancy defects and interstitial defects, such as Frenkel pairs or Schottky defects, , substitutional defects, or antisite defects can be incorporated into just about any appropriate model with almost no additional costs.

 

Epitaxial growth

 

Models of epitaxial growth are closely related to those of dislocations, in that two layers in a structure are mismatched - the only real difference being that the two layers comprise different materials. The most appropriate materials for epitaxial growth tend to have closely matched unit cell parameters, such as in the epitaxial growth of GaN on Al2O3.

 

 

model of epitaxial growth

 

Epitaxial growth of GaN on Alumina.

 

 

 

Miramodus Ltd. 7 Nettlingflat, Heriot, EH38 5YF     Tel: 07794361024
Company Registered in Scotland no. SC329683    VAT no 916067916